Polymer Flow Module

Simulate the Flow of Non-Newtonian Fluids with the Polymer Flow Module

 Read more below 

Want to know more?

Modelling Software for Single and Multiphase Flows in Non-Newtonian Fluids

The Polymer Flow Module is an add-on to COMSOL Multiphysics that is used for defining and solving problems involving non-Newtonian fluids with viscoelastic, thixotropic, shear thickening, or shear thinning properties. You can account for the properties of the fluids as a function of temperature and composition to model cure and polymerisation. In combination with other modules in COMSOL Multiphysics, you can also model fully coupled and time-dependent fluid-structure interactions.

What You Can Model with the Polymer Flow Module

Non-Newtonian fluids are found in a great variety of processes in the polymer, food, pharmaceutical, cosmetics, household, and fine chemicals industries. Examples of these fluids are coatings, paints, yogurt, ketchup, colloidal suspensions, aqueous suspensions of drugs, lotions, creams, shampoo, suspensions of peptides and proteins, to mention a few. Modelling and simulation can be used to design and optimise processes where these fluids are involved, ensuring high-quality products for the end user.

 
Polymer Melts, Paints, and Protein Suspensions

Viscoelastic fluid models account for the elasticity in these types of fluids. As the fluid is deformed, there is a certain amount of force that works toward returning the fluid to its undeformed state. Important aspects of modelling are to estimate the deformation of the fluid with time, that is the shape of the air–liquid interface, the local forces on the surfaces that may interact with these fluids, and the pressure losses in a system where the fluid flow occurs. Typical examples of these fluids are polymer melts, paints, and suspensions of proteins.

 
Colloidal Suspensions, Ketchup, and Lotions

Colloidal suspensions may exhibit shear thickening behaviour, where viscosity increases substantially with shear rate. Other suspensions may be shear thinning, for example syrups and ketchup, where the viscosity decreases with shear rate. Thixotropic fluids also have a time dependency, where the viscosity decreases with the duration of the shear rate. The models describing these fluids are all inelastic, but they describe highly non-Newtonian behaviour. The purpose of modelling and simulation is similar to that for viscoelastic fluids above: estimate the shape of the air–liquid interface, the local forces on the surfaces that may interact with these fluids, and the pressure losses in a system where the fluid flow occurs. Additionally, the dependency on temperature and composition may be important for the design of manufacturing processes, for example, with the curing of rubber melts.

Features and Functionality in the Polymer Flow Module

Viscoelastic Fluid Models

The Polymer Flow Module features a variety of viscoelastic fluid models. These models differ in the constitutive relations describing the deformation and the forces caused by the fluid's deformation. The Oldroyd-B model uses a linear relation, which can be described as a suspension of Hookean springs in a Newtonian solvent, while the others describe nonlinear elastic effects and shear thinning.

  • Oldroyd-B
  • Gisekus
  • FENE-P
  • LPTT
Inelastic Non-Newtonian Models

In addition to the viscoelastic models, the Polymer Flow Module features a wide range of inelastic non-Newtonian models. Many of the models are generic, used to describe shear thinning and shear thickening. For more specific applications, there are models for viscoplastic and thixotropic fluids.

  • Power Law
  • Carreau
  • Carreau–Yasuda
  • Cross
  • Cross–Williamson
  • Ellis
  • Bingham–Papanastasiou (Viscoplastic)
  • Casson–Papanastasiou (Viscoplastic)
  • Herschel–Bulkley–Papanastasiou
  • Robertsson–Stiff–Papanastasiou
  • DeKee–Turcotte–Papanastasiou
  • Houska thixotropy (Thixotropic)
Multiphase Flow Models

To make it possible to model the liquid–air interface when simulating coatings, free surfaces, and mold filling, the Polymer Flow Module includes three different separated multiphase flow models based on surface tracking methods. The Level Set method tracks the interface position by solving a transport equation for the level-set function. The Phase Field method tracks the interface position by solving two transport equations for the phase field variable and the mixing energy density. The Moving Mesh method tracks the interface position with a mesh that changes shape.

Thermal Functions for Temperature Dependence

A common method of polymer extrusion and mould filling is to melt the rubber or polymer mixture. The mixture is then allowed to cure inside the mould. The Polymer Flow Module includes the thermal models required to model these processes: the Arrhenius, Williams–Landel–Ferry, and Exponential models are all available.

Every business and every simulation need is different.

In order to fully evaluate whether or not the COMSOL Multiphysics® software will meet your requirements, you need to contact us. By talking to one of our sales representatives, you will get personalised recommendations and fully documented examples to help you get the most out of your evaluation and guide you to choose the best license option to suit your needs.

Fill in your contact details and any specific comments or questions, and submit. You will receive a response from a sales representative within one business day.

Request a Software Demonstration:

Want to know more?

(COMSOL®, COMSOL Multiphysics®, Capture the Concept, COMSOL Desktop®) are registered trademarks of COMSOL AB, LiveLink™ is an unregistered trademark of COMSOL AB, ACIS and SAT are registered trademarks of Spatial Corporation. AutoCAD, AutoCAD Inventor and Inventor are registered trademarks or trademarks of Autodesk, Inc., and/or its subsidiaries and/or affiliates in the USA and/or other countries. CATIA is a registered trademark of Dassault Systèmes or its subsidiaries in the US and/or other countries. Microsoft, Excel and Windows are registered trademarks or trademarks of Microsoft Corporation in the United States and/or other countries. Parasolid and Solid Edge are trademarks or registered trademarks of Siemens Product Lifecycle Management Software Inc. or its subsidiaries in the United States and in other countries. SolidWorks is a registered trademark of Dassault Systèmes SolidWorks Corporation. Creo and Pro/ENGINEER are trademarks or registered trademarks of PTC Inc. or its subsidiaries in the U.S. and in other countries. MATLAB is a registered trademark of The MathWorks, Inc. Amazon Web Services, the “Powered by Amazon Web Services” logo, Amazon EC2 and Amazon Elastic Compute Cloud are trademarks of Amazon.com, Inc. or its affiliates in the United States and/or other countries. Mac and Macintosh are trademarks of Apple Inc., registered in the U.S. and other countries. Linux is a registered trademark of Linus Torvalds. Red Hat is a registered trademark of Red Hat, Inc. in the U.S. and other countries. Neither COMSOL nor any COMSOL products are affiliated with, endorsed by, sponsored by, or supported by any of these other trademark owners. Other product names, brand names or logos are trademarks or registered trademarks of their respective holders.
chevron-left-circlechevron-right-circle