Metal Processing Module

Simulate Metallurgical Phase Transformations with the Metal Processing Module

 Read more below 

Want to know more?

Phase Transformations in Mechanical Components

When a material like steel undergoes heating or cooling from an elevated temperature, metallurgical phase transformations may occur. These transformations are sometimes deliberate, as part of the heat treatment of a mechanical component, or introduced inadvertently, as with welding. The metallurgical phases that are present in a component will affect its mechanical and thermal properties, and by optimising the phase composition, you can improve the performance of a component. The Metal Processing Module, an add-on to the COMSOL Multiphysics® software, can be used to simulate metallurgical phase transformations in 3D, 2D, and 2D axisymmetric bodies.

What You Can Model with the Metal Processing Module

The Metal Processing Module provides a comprehensive set of tools for simulating manufacturing processes like steel quenching, welding, and additive manufacturing. These tools are packaged into physics interfaces, which automatically set up and solve the equations specific to the manufacturing process that you are modelling.

Steel Quenching
Carburisation
Transformation-Induced Plasticity (TRIP)
Diffusive and Displacive Phase Transformations
Structural Analysis
Thermal Analysis
Importing Material Properties
Induction Hardening
Steel quenching is a heat treatment process in which steel parts, heated to a fully austenitic state, are quenched. Being a multiphysics process, steel quenching involves a combination of austenite decomposition, heat transfer, and structural analysis. With the Steel Quenching multiphysics interface in the Metal Processing Module, several features are added automatically to facilitate the model setup. The interface prompts you to enter settings for the austenite, ferrite, pearlite, bainite, and martensite phases as well as the phase transformations from austenite to each of the others. Multiphysics couplings are also set up to account for the effects of latent heat and phase transformation strains.

Additionally, material properties for structural analysis can be temperature dependent and the plastic dissipation can act as a heat source in the heat transfer analysis. After running the analysis, you can examine phase compositions as well as the influence of cooling rate on the final distortions and residual stresses during quenching of a component. With these results, you gain insight into the efficacy of a certain quenchant and how the physical geometry of a component affects the attainable phase composition in its interior.
The process of carburisation involves heating a steel component and exposing it to a carbon-rich environment, such as carbon monoxide. Diffusion of carbon from the surrounding environment occurs through the boundary and into the material by means of a time-dependent diffusion process. You can model this process using the Carburisation interface and modify your phase transformation model data to depend on the calculated carbon content. Running carburisation analyses helps ensure that the process is carried out correctly; carburisation followed by quenching can produce compressive stresses at the surface of a component, which is beneficial from a fatigue standpoint.
In general, phase transformations occur while the material is subjected to a mechanical stress, resulting in transformation-induced plasticity (TRIP). An inelastic straining of the material results from stresses that are below the yield stress and would not cause plastic flow in a classical plasticity sense. The Metal Processing Module can be used to analyse the TRIP effect, for example, in the transformation from austenite to martensite.
For diffusion-controlled phase transformations, such as when austenite decomposes into ferrite, two types of phase transformation models are provided: Leblond–Devaux and Johnson–Mehl–Avrami–Kolmogorov (JMAK). For modelling displacive (diffusionless) martensitic phase transformations, the Koistinen–Marburger model is available. These phase transformation models are available through the generalised Metal Phase Transformation interface that lets you define an arbitrary number of phases and phase transformations.


Additionally, it is possible to define your own phase transformation models to use in a simulation, and experimental calibration may be necessary for a given phase transformation. It is also possible to compute common phase transformation diagrams to facilitate calibration against experimental data, such as continuous cooling transformation (CCT) and time temperature transformation (TTT) diagrams.
Stresses and strains are computed using the effective material properties of the compound material, which are generally temperature and phase-composition dependent. The elastoplastic behaviour of the compound material is averaged across the individual phases. In the case where one phase is significantly harder than the others, a nonlinear weighting scheme can be used to model the effective initial yield stress of the compound material. There is a plastic recovery option for ensuring that phases appear gradually and devoid of prior plastic straining. The volume reference temperature and thermal expansion coefficient are used to compute a thermal strain tensor in each phase. The thermal strain tensors of the phases are averaged into a thermal strain of the compound material. For more advanced structural analyses, the Metal Processing Module can be combined with the Structural Mechanics Module.
The Metal Processing Module is equipped to model heat transport by using the full heat equation in the analysis. Additionally, the thermal conductivity, density, and specific heat capacity can be temperature dependent, and can even depend on the current phase composition. For example, the thermal conductivity of austenite is different from that of ferrite, and as the phase fractions evolve, so will the thermal conductivity of the compound material. For more advanced heat transfer analyses, the Metal Processing Module can be combined with the Heat Transfer Module.

The material properties of metallurgical phases, such as austenite and pearlite, will depend on temperature and plastic strain, among other factors. The effort involved in obtaining material properties for the different metallurgical phases can be significant, and as an option, you can import material properties from the software JMatPro®.

If you add the AC/DC Module, you can perform induction hardening simulations, where you use the calculated temperature field from an induction heating simulation as the input to a quenching simulation.

Every business and every simulation need is different.

In order to fully evaluate whether or not the COMSOL Multiphysics® software will meet your requirements, you need to contact us. By talking to one of our sales representatives, you will get personalised recommendations and fully documented examples to help you get the most out of your evaluation and guide you to choose the best license option to suit your needs.

Fill in your contact details and any specific comments or questions, and submit. You will receive a response from a sales representative within one business day.

Request a Software Demonstration:

Want to know more?

(COMSOL®, COMSOL Multiphysics®, Capture the Concept, COMSOL Desktop®) are registered trademarks of COMSOL AB, LiveLink™ is an unregistered trademark of COMSOL AB, ACIS and SAT are registered trademarks of Spatial Corporation. AutoCAD, AutoCAD Inventor and Inventor are registered trademarks or trademarks of Autodesk, Inc., and/or its subsidiaries and/or affiliates in the USA and/or other countries. CATIA is a registered trademark of Dassault Systèmes or its subsidiaries in the US and/or other countries. Microsoft, Excel and Windows are registered trademarks or trademarks of Microsoft Corporation in the United States and/or other countries. Parasolid and Solid Edge are trademarks or registered trademarks of Siemens Product Lifecycle Management Software Inc. or its subsidiaries in the United States and in other countries. SolidWorks is a registered trademark of Dassault Systèmes SolidWorks Corporation. Creo and Pro/ENGINEER are trademarks or registered trademarks of PTC Inc. or its subsidiaries in the U.S. and in other countries. MATLAB is a registered trademark of The MathWorks, Inc. Amazon Web Services, the “Powered by Amazon Web Services” logo, Amazon EC2 and Amazon Elastic Compute Cloud are trademarks of Amazon.com, Inc. or its affiliates in the United States and/or other countries. Mac and Macintosh are trademarks of Apple Inc., registered in the U.S. and other countries. Linux is a registered trademark of Linus Torvalds. Red Hat is a registered trademark of Red Hat, Inc. in the U.S. and other countries. Neither COMSOL nor any COMSOL products are affiliated with, endorsed by, sponsored by, or supported by any of these other trademark owners. Other product names, brand names or logos are trademarks or registered trademarks of their respective holders.
chevron-left-circlechevron-right-circle